Printer Specifications
Paper width
and length:
l For multi-part forms joined with
spot-
gluing, be sure the spots of glue are
spaced the same way on the left and
right edges of the paper.
l The binding area should be flat and have
no creases.
l Overlapping multi-part forms should be
joined together at the top of the pages
and not along the sides of the pages.
l The sprocket holes of all the form sheets
should be aligned properly.
Labels:
l Labels should be securely attached to the
backing sheet.
*
The backing sheet should be covered
with the label material, both in the label
area and in the spaces between labels.
(The backing sheet should not be
exposed.)
l The corners of the labels should be
rounded.
l The label surface should be flat.
Peper
Continuous paper
(in&ding
multi-part
forms)
Labels
backing sheet
label
Width and length
Width:
101
to
406
mm
(4.0
to
16.0”)
Width:
101
to
406
mm
(4.0
to
lS.Ol)
Length:
88.9
mm (3.5”)
minimum
63.5
x
23.8
mm
(2.50
x
0.94”)
minimum
Technical Specifications
8-5
