A SERVICE OF

logo

Using the Two-Tractor System
15.
Press the ON
LINE
button to put the printer on line so it is ready
to print. The paper is now loaded to the top of form position. If
it looks like the printing will start too high or low on the page,
see the section on adjusting the top of form position in
Chapter
3.
Notes:
l Before you begin printing, be sure to check the page length
and skip over perforation settings, and readjust the settings if
necessary. See the section on page length and skip over
perforation in Chapter
3.
l If you open the top cover while the
DFX
is printing, the printer
beeps four times, goes off line, and stops printing. To resume
printing,close
the
top
cover and press the ON LINE button.
Paper Handling
2-19