Chapter 3 System Configuration 39
2. Type the setsnmpvacm command:
where
OID_subtree is the MIB OID subtree for the view (values start at .1 for the
entire MIB tree, and can be limited to certain portions of the tree by using the
optional
OID_Mask), and viewname is the name of the view to create for the SNMP
agent exported MIB information. View access is read-only for the agent.
3. To verify the operation, type the showsnmpvacm command.
▼ To Give a VACM Group Access to a VACM View
1. Log in to the XSCF console with platadm privileges.
2. Type the setsnmpvacm command:
where
viewname is a valid SNMP agent view, and groupname is a valid SNMP agent
group name.
3. To verify the operation, type the showsnmpvacm command.
▼ To Display VACM Information for the SNMP
Agent
1. Log in to the XSCF console with platadm or platop privileges.
XSCF> setsnmpvacm createview -s OID_subtree [-m OID_Mask] viewname
XSCF>
setsnmpvacm createaccess -r viewname groupname
