1.1 General Features
126 Feature Manual
• When a dialed telephone number matches one of the Automatic Pause Insertion codes assigned
through system programming ( [311] Automatic Pause Insertion Code), a pause will be automatically
inserted after the code. This is particularly convenient if a second dial tone is sent from your telephone
company.
• This feature functions for Speed Dialing, One-touch Dialing, Last Number Redial, Saved Number
Redial, Hot Line, and Call Forwarding—To Outside (CO) Line, as well as for normal calls.
Programming Manual References
[PT Programming]
[311] Automatic Pause Insertion Code
[403] Host PBX Access Code
[417] Pause Time
[PC Programming]
9.1.10 Automatic Pause Insertion Codes [1-9]
9.3.3 Detail [3-3]—Host PBX Access Codes, Pause Time
Feature Manual References
1.1.65 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.1.117 Toll Restriction (TRS)
1.1.99 PC Programming
Description
System programming settings can be accessed using a PC and the Panasonic KX-TA Maintenance Console
software as well as by using a proprietary telephone (PT) (
1.1.103 PT Programming). System
programming and data upload/download can be performed either through on-site programming or remote
programming.
1. On-site Programming: Programming that is performed using an on-site PC connected directly to
the PBX.
2. Remote Programming: Programming that is performed using an off-site PC that connects to the
PBX via an outside (CO) line.
1. Connection Methods for On-site Programming
Method Description
Required
Hardware
Serial Interface
(RS-232C port)
The PC is connected to the PBX via the Serial Interface (RS-
232C port) of the PBX.
—
USB The PC is connected to the PBX via the USB port of the PBX. —
