1.1 General Features
Feature Manual 131
c) CO para: The data assigned for each outside (CO) line
d) Extn. para: The data assigned for each extension
e) DSS para: The data assigned on the Direct Station Selection (DSS) buttons and Programmable
Feature (PF) buttons on the DSS Console
f) Speed dial: The System Speed Dialing numbers and names in [001] System Speed Dialing
Number and [011] System Speed Dialing Name
Installation Manual References
2.10.1 Starting the Advanced Hybrid System
Programming Manual References
2 PT Programming
[PT Programming]
[001] System Speed Dialing Number
[002] System Password
[011] System Speed Dialing Name
[999] System Data Clear
[PC Programming]
8.4 System Data Clear
9.1.2 Main [1-2]—System Password
9.4.1 System Speed Dialing [4-1]
Feature Manual References
1.1.87 Operator/Manager Features
Operating Manual References
3.1 Personal Programming
3.2 System Programming (Manager Programming)
1.1.104 Pulse to Tone Conversion
Description
An extension user can temporarily switch from Pulse mode to DTMF mode in order to access special
services such as computer-accessed long-distance calling or voice mail services.
Conditions
• This feature functions only on outside (CO) lines set to "Pulse" or "Call Block" mode ( [401] Dial
Mode).
• It is programmable whether DTMF dialing is sent to the telephone company when an extension user
redials after changing from Pulse mode to DTMF mode by pressing the " #" key ( [119] Redialing
after Pulse to Tone Conversion).
