A SERVICE OF

logo

1.1 General Features
Feature Manual 47
[628] SLT Caller ID
[629] SLT Fixed Bell Pattern
[900] Caller ID
[901] Caller ID Area Code
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long-distance Calls
[904] Caller ID Log Priority
[906] Caller ID SMDR Format
[907] Caller ID SMDR Printout
[PC Programming]
9.9.1 Main [9-1]—CO Line Settings—Caller ID, Caller ID Modification—Local Area Code (for Local Call 1–
5), Caller ID Modification—Removed Digits, Caller ID Modification—Added Number, Caller ID SMDR
Format, Caller ID SMDR Printout
9.9.2 SLT Caller ID [9-2]
9.9.3 Call Log [9-3]—Caller ID Log Priority
Feature Manual References
1.1.18 Call Log, Incoming
1.1.113 System Speed Dialing
2.2.1 Tones/Ring Tones
Operating Manual References
1.3.18 Call Log, Incoming
1.1.31 Calling Party Control (CPC) Signal Detection
Description
A CPC (Calling Party Control) signal is an on-hook indication (disconnect signal) sent from an outside (CO)
line when the other party hangs up. To maintain efficient utilization of outside (CO) lines, the PBX monitors
each line's status and when a CPC signal is detected on a line, the PBX disconnects the line and alerts the
extension with a reorder tone.
Conditions
CPC Signal Detection is programmable for incoming outside (CO) line calls ( [420] CPC Signal
Detection—Incoming) and for outgoing outside (CO) line calls ( [421] CPC Signal Detection—
Outgoing).
If a CPC signal is detected during a call between a caller using the DISA feature ( 1.1.41 Direct
Inward System Access (DISA)) and an extension or an outside party, the call will be disconnected.
Generally, CPC Signal Detection functions for incoming outside (CO) line calls and does not function
for outgoing outside (CO) line calls. If an extension user remains off-hook after an outgoing outside
(CO) line call is completed, the PBX will not release all the switches used to establish the connection.
The connected outside (CO) line will continue to be in use. To prevent this, CPC Signal Detection can
be programmed to function for outgoing outside (CO) line calls.