1.1 General Features
64 Feature Manual
9.1.3 Numbering Plan [1-3]—Ext. no.
9.1.7 Timers [1-6]—Call Duration—CO-to-CO Duration Limit
9.1.11 Detail [1-10]—Extension—Ringback Tone Pattern
9.2.11 Extension Group [2-6]—Group No., Extension Hunting—Extension Hunting
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
9.3.3 Detail [3-3]—CPC Signal Detection—Incoming, CPC Signal Detection—Outgoing
9.6 DISA [6]
9.8.2 Others [8-2]—DISA IRNA to BV—Day, Night, Lunch
Feature Manual References
1.1.8 Built-in Voice Message (BV)
1.1.37 Data Line Security
1.1.67 Idle Extension Hunting
1.1.68 Intercept Routing
1.1.88 Outgoing Message (OGM) for DISA
1.1.91 Outside-to-Outside (CO-to-CO) Line Call Duration
1.1.112 Station Message Detail Recording (SMDR)
Operating Manual References
1.3.34 Direct Inward System Access (DISA)
3.2.1 Programming Information
1.1.42 Direct Inward System Access (DISA) Ring
Description
A Direct Inward System Access (DISA) ring group is a specific extension group that receives DISA calls
directed to the group. All extensions in the DISA ring group assigned as an Automated Attendant (AA)
destination ( [501] DISA Built-in AA) ring simultaneously.
Conditions
• To use this feature, "DISA" must be selected as the distribution method for the desired outside (CO) line
port ( [414-416] CO Line Mode—Day/Night/Lunch), and DISA AA service must be assigned as the
destination of incoming outside (CO) line calls via the DISA feature ( [500] DISA Incoming Call Dial
Mode).
• The Log-in or Log-out status can be set for each extension ( 1.1.80 Log-in/Log-out). The last member
of a group cannot log out.
Programming Manual References
[PT Programming]
[411-413] Delayed Ringing—Day/Night/Lunch
[414-416] CO Line Mode—Day/Night/Lunch
