1.1 General Features
Feature Manual 83
4. Feature Numbering (available while on-hook)
Features that are available while on-hook have fixed numbers, as shown in the following table:
[Feature Numbering Table (available while on-hook)]
Conditions
• If a feature number includes " " or "#" except for those that can use "0" instead of "#", rotary SLT users
cannot use it.
• Feature number + Additional number (Parameter)
Certain feature numbers require additional digits to make the feature active. For example, to set Call
Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same feature
number should be followed by "0".
Programming Manual References
[PT Programming]
[009] Extension Number
[PC Programming]
9.1.3 Numbering Plan [1-3]—Ext. no.
Operating Manual References
4.2.1 Feature Number Table
1.1.58 Firmware Upgrade
Description
It is possible to upgrade the PBX software via the Serial Interface (RS-232C port) or USB port using the KX-
TA Maintenance Console software. Even if a user upgrades the PBX software, the system data will not be
lost. For more information on how to upgrade the PBX software, refer to the on-line help.
Pulse to Tone Conversion
#
* Dial after dialing the TAM's extension number and hearing its busy tone.
Feature Numbering
Background Music (BGM) set/cancel 1
Time Service mode display #
Extension number and extension name display/
date (month/day) and time display/
date (month/day/year/day of the week) display changing
Feature Numbering
