1.1 General Features
Feature Manual 23
[PC Programming]
9.1.7 Timers [1-6]—Start Time—Call Forwarding
9.2.1 Main [2-1]—Call Forward to CO
9.2.2 Feature settings [2-2]—FWD/DND
9.8.1 Main [8-1]—BV for Extension
Feature Manual References
1.1.59 Fixed Buttons
1.1.61 Flexible Buttons
Operating Manual References
1.3.7 Built-in Voice Message (BV)
1.3.9 Call Forwarding (FWD)—SUMMARY
1.3.88 Voice Mail Integration
3.1.3 Flexible Button Assignment—FWD/DND button
1.1.11 Call Forwarding (FWD)—All Calls
Description
All calls are forwarded to another extension.
Conditions
• This feature does not apply to calls from Hold Recall and Camp-on Recall.
• The types of calls that are forwarded by this feature are:
• When a call is forwarded, the corresponding message waiting indication is not forwarded. The
MESSAGE button light or Message/Ringer Lamp turns on only at the originally called extension (
1.1.82 Message Waiting).
• It is programmable whether the calls received on outside (CO) lines programmed as "Normal" ( [414-
416] CO Line Mode—Day/Night/Lunch) are forwarded for each extension or not ( [963] Call
Forwarding Selection). If FWD is enabled for an extension whose FWD destination is a VPS or
Telephone Answering Machine (TAM) and the extension has been assigned to ring with other
extensions, the VPS or TAM may answer the call before other extensions can answer it. To prevent this,
disable FWD.
• A call can only be automatically forwarded one time. In the example below, extension A's calls are being
forwarded to extension B. If extension B tries to set FWD to extension C, the extension B user hears a
reorder tone and the setting is denied. If extension B has already set FWD to extension C, and
extension A tries to set FWD to extension B, the setting is also denied.
Call Type
Outside (CO) line calls Normal, Direct In Line (DIL), Direct Inward System Access (DISA)
Intercom calls Extension, Transfer
