User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-11-
Figure 2-3 shows the front panel of WGSD-1022C.
Figure 2-3 WGSD-1022C front panel.
2.1.3 LED Indications
■ WSD-800
■ System
LED Color Function
PWR
Green Lights to indicate that the Switch is powered on.
SYS
Green Lights to indicate the system is working.
■ Per 10/100Base-TX RJ-45 Port ( Port-1 to Port-8)
LED Color Function
LNK/ACT
Orange Blink to indicate that the Switch is actively sending or receiving data over that
port.
FDX/COL
Green Lights to indicate respective port is in full duplex (FDX) mode. Otherwise, it is
OFF for half duplex (HDX) operations. It blinking amber when collisions are
occurring on the respective port.
100
Green Lights to indicate the port is acting in 100Mbps speed, off to indicate the port is
acting in 10Mbps.
■ WGSD-910 / WGSD-1022C
■ System
LED Color Function
PWR
Green
Lights to indicate that the Switch has power.
SYS
Green
Lights to indicate the system is working.
■ Per 10/100Base-TX RJ-45 Port ( Port-1 to Port-8)
LED Color Function
LNK/ACT
Green
Lights to indicate the link through that port is successfully established.
Blink: indicate that the Switch is actively sending or receiving data over that port.
SPEED
Orange
Lights to indicate the port is running in 100Mbps speed.
Off: indicate that the port is operating at 10Mbps.
