User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-8-
Switch Throughput
1.19Mpps 2.67Mpps 4.16Mpps
Switch Architecture
Store-and-Forward
Address Table
8K entries
Share data Buffer
1Mbit
Maximum Frame Size
1522 Bytes packet
Flow Control
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED
Power, Link/Act and speed per port
Console Interface
One RS-232 DB-9 male connector for Switch management
Power requirement
110~240V AC, 50/60Hz
Power Consumption
12.2 watts / 41BTU
Operating environment
0~50 Degree C, 5%~90%RH
Storage environment
-20~70 Degree C, 5%~90%RH
Dimension (W x D x H)
280 x 173 x 44 mm
Weight
1.24kg
Layer 2 function
Management Interface
Console, Telnet, Web Browser, SNMP v1 and v2c
Port configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status, trunk status.
VLAN
Port-Based VLAN, up to 49 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID,up to 255 VLAN groups
Spanning Tree
IEEE 802.1d, IEEE 802.1w
Link Aggregation
Supports 4 groups of 8-Port trunk support
QoS
Traffic classification based on Port Number, 802.1p priority, DS/TOS field
in IP Packet
IGMP Snooping
v1 and v2
Allow to disable or enable.
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
Port Mirror
RX/TX/Both
