A SERVICE OF

logo

User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-86-
NOTE: The Multicast group VLAN member must be configured first, and then setup the Static Routing
Port. Or the function will not work properly.
VLAN configure
4. Set the VLAN mode to be 802.1Q VLAN
5. At Step-3, we had set Port-2 as VLAN 6 Static Routing Port, so we have to configure Port-2 as VLAN 6
member port.
6. Cooperate with IGMP Snooping,and 802.1Q VLAN,Port-6 of VLAN 2 and Port-7 of VLAN 3 are able to
receive the Multicast group traffic from Port-2 with different VLAN groups setting