User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-19-
3.4 Telnet login
The Switch also supports telnet for remote management. The Switch asks for user name and password for remote
login when using telnet, please use “admin” for username and “admin” for password.
3.5 Commands
There are two levels for console commands. The first level provides commands to show system informations and
current configurations. The second level (privileged mode) provides commands to set clear and show the
configuration.
3.5.1 First level commands
The follow table lists the first commands and the equivalent usages.
Command Description
enable Enable privileged mode
show channel Show channel information
show console-info Show console-info
show dow1x local-userInfo Show dot1x local user information
show dot1x state Show dot1x information
show igmp-snooping group number show igmp snooping group-limit
show igmp-snooping group policy Show igmp snooping group policy
show igmp-snooping info Show igmp snooping information
show igmp-snooping policy deny Show igmp snooping policy deny
show ip http server Show http server information
show ip telnet server Show telnet server information
show ipstack info Show ip stack information
show mirror Show mirror information
show multicast router Show multicast router port information
show port counter Show port counter information
show port dot1x Show port dot1x information
show port mac-learning Show MACs on certain port
show port rate-shaping Show port ingress and egress rate-shaping
show port rstp-extension Show port RSTP port role and protocol mode
show port spantree Show spantree information on ports
show port state Show port infomation
show port storm-limit Show port storm limit mode and rate
show qos map cos-queue-map Show qos map cos-queue-map
