User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-23-
set ipstack disable Set ipstack disable
set ipstack group Set ipstack group STR
set ipstack mac-addr Set ipstack mac-addr
set ipstack mode Set ipstack mode master/client
set ipstack system-priority Set ipstack system-priority
set mirror Enable/Disable mirror function
set mirror capture-port Set a port to capture traffic
set mirror monitored-port egress Capture egress traffic
set mirror monitored-port ingress Capture ingress traffic
set multicast router Set multicst router port
set password Set the password for telnet
set port disable Disable a port
set port duplex Set port transmission type
set port enable Enable a port
set port flow-control Set port traffic flowcontrol
set port mcheck-rstp Set port mcheck
set port point-to-point Set port point-to-point admin value
set port rate-shaping egress Set port egress rate-shaping rate
set port rate-shaping ingress Set port ingress rate-shaping rate
set port rate-shaping egress Set port egress rate-shaping rate
set port rate-shaping ingress Set port ingress rate-shaping rate
set port spantree <port_num> portco Set spanning tree port cost
set port spantree <port_num> portfa Set spanning tree PortFast feature
set port spantree <port_num> portpr Set spanning tree port priority
set port speed Set port transmission speed
set port storm-limit mode Set port storm limit mode
set port storm-limit rate Set port storm limit rate
set port vlan-type Set port vlan-type
set qos map cos-queue-map Set the queue number of each cos
set qos map dot1p-cos-map Set the cos value of each dot1p priority
set qos map mac-cos-map Set MAC based qos
set qos map port-cos-map Set port's cos
set qos map vlan-cos-map Set vlan based qos
set qos queue egress-policy Set the egress policy
set radius key Set share key for radius server
set radius server Set radius server parameters
set rstp force-version Set RSTP force version
set security MAC-aging Set MAC aging time
set security filter-MAC Create MAC filter entry
