User’s Manual of WSD-800 / WGSD-910/WGSD-1022C
-33-
4.4.6 Saving Parameters
It takes effect immediately when you change the parameters of the management function when the Switch is
running. But the parameters would not be saved after reboot the Switch. To keep the changed parameters, Click
on the System/Saving Parameters menu button, and click on the “Save” button on the web main page as show
in the following.
4.4.7 Parameters Backup & Recovery
This function is to backup the running configuration to the workstation and to restore the configuration you had
saved in the workstation.
Click on the System/Backup & Recovering menu button, and the following table shows in the web main page.
To backup the running configuration, click on the “Backup the system’s parameters” link, and a pop up window
shows to save the configuration of the Switch to your workstation.
To recover a saved configuration, click on the “Browse” button in the Parameters Recovery table. A pop up
window would direct you to upload the configuration file.
