Filter
Top Products
22 78-8135-4385-3-A
18.3 Place several drops of alcohol on to the rectangular
rubber pad.
18.4 Before the alcohol evaporates, place a sheet of the
0.5 micron pale gray diamond lapping film on the
polishing pad, shiny side down.
18.5 Clean the lapping film with a lint-free cloth moistened
with isopropyl alcohol.
Note: The 0.5 micron diamond lapping film can be used for
up to 10 connectors.
18.6 Place several drops of distilled water on to the
diamond lapping film.
18.7 Insert the connector into the polishing jig assembly.
18.8 Clean the flat side of the polishing jig with a lint-free
cloth moistened with isopropyl alcohol.
18.9 Place the polishing jig assembly on the wet diamond
lapping film. Perform 3 to 4 figure eights.
18.10 Leaving the polishing jig assembly positioned on
the lapping film, rotate 180 degrees. Perform 3 to 4
additional figure eights.