Filter
Top Products
78-8135-4385-3-A 9
8.0 Strip Guide
9.0 Stripping Procedure for 900 micron
Fiber
9.1 Place the cable on the strip template. Mark buffer
at 11 mm. Using the 3M
™
Stripping Tool 6365-ST,
remove the buffer in small increments until 11 mm of
buffer has been removed.
9.2 Using a lint-free cloth moistened with isopropyl
alcohol, clean the bare fiber to remove any oils or
acrylate coating debris.
9.3 Check the final strip length and adjust if necessary.
10.0 Stripping Procedure for 1.6 – 2.0 mm
Jacketed Fiber
10.1 Place the jacketed fiber on the strip template and use
a fiber marking pen to mark the location of the jacket
cut. Using the 3M
™
Stripping Tool 6365-ST, remove
33 mm (1 1/3") of jacket off cable.