Filter
Top Products
27
RFL Setup
Use the RFL Setup to change the Gauge and/or
the Temperature of a single section of cable.
Press the [Tab] key to select either the Wire
Gauge menu or the Temperature for editing.
If you select the Wire Gauge menu, press the [Up]
and [Down] keys to select the desired gauge.
If you choose Temperature, enter the value of
the desired temperature using the blue keys as a
numeric keypad.
Press the [Enter] key to accept the changes and
return to the previous screen. Press the [Back]
key to return without saving the changes.
Press the [Setup] key if you would like to go to
the Multi-Section Setup.
RFL Multi-section Setup