Filter
Top Products
36
Auto Setup (continued)
There are three choices in the Auto Setup menu:
• Dial Loss
• Dial Noise/Longitudinal Balance
• Opens Cable Type
Press the [Up] or [Down] keys to move to a
desired selection. Press the [Enter] key to accept
the choice. Use the [Back] key to return to the
Auto Menu.
Dial Loss:
Use this setup to enter a ‘milliwatt’ or ‘Dynatel
1020’ test line number for the Active Pair Loss
measurement.
The screen and controls for the Auto Dial Loss
setup are similar to the Dial Loss screen.
Dial Noise/Longitudinal Balance
Use this setup to enter a ‘quiet’ test line number
(or a ‘1’ to break dial tone) for both the Active
Pair Noise and Longitudinal Balance
measurements.
The screen and controls for this setup are similar
as the Dial Noise screen.
Opens Cable Type:
Use this setup to select the Cable Type used for
the Inactive Pair Opens measurement.
Note that
you may not select Capacitiance from this menu.