Filter
Top Products
28
The Multi-Section screen shows a summary of
the lengths for up to six sections. The screen
also shows the common temperature for all six
sections.
Press the [Tab] key to select either the Section
Information or the Temperature for editing.
I
f you choose Temperature, enter the value of
the desired temperature using the Blue keys as a
numeric keypad.
If you chose to edit the section information ,
use the [Up] and [Down] keys to select the
desired section, then use the [Setup] key to edit
the selected section and go to the following
screen:
Press the [Tab] key to select either the Wire
Gauge menu or the Section Length.
If you select the Wire Gauge menu, press the [Up]
and [Down] keys to select the desired gauge.
If you choose Section Length, enter the value of
the desired temperature using the blue keys.
Press the [Enter] key to accept the changes and
return to the previous screen. Press the [Back]
key to return to the previous screen without
making changes.
Press the [Enter] key from the RFL Multi-
section screen (shown on page 27) to perform a
muti-section RFL measurement.