Filter
Top Products
ADAM-5560 Series User Manual 8
Remote I/O Expansibility
ADAM-5560 Series Controller supports not only Modbus/RTU Master function via
serial ports, but also the Modbus/TCP Client to retrieve data from remote I/O, and
Modbus/TCP Server to exchange data with other Modbus devices via Ethernet port.
This Modbus features are very useful when the control system needs expand the
remote I/O modules or connect to other controllers.
1.3 Specifications
1.3.1 System
CPU: Intel ATOM Z510P Processor
Operating system: Windows CE 5.0
Memory: 1 GB DDR2 SDRAM with 1MB Battery Backup
One CompactFlash® Card (Internal)
Real-time clock: Yes
Watchdog timer: Yes
– Operating System Watchdog
– KW application watchdog
– Modbus server communication watchdog
USB Port: USB 2.0 ports * 2
VGA Port: 1024 X 768 Resolution
Ethernet Port: 10M/100M bps * 2
RJ-45 connectors
COM1: RS-232/485 selectable, DB-9 connector
COM2: RS-485, Terminal Block
COM3: RS-232/485 selectable, DB-9 connector
COM4: RS-232/485 selectable, DB-9 connector
I/O capacity: 7 slots
Maximum number of nodes: 256 nodes
System power consumption: 17 W (without I/O modules)
1.3.2 USB Ports
USB 2.0
1.3.3 VGA Port
1024 X 768 Resolution
1.3.4 Ethernet Ports
10M/100M bps x 2
RJ-45 connectors
Transmission Speed 10M/100M bps (10/100 Base-T)
1.3.5 RS-232/485 interface (COM1)
RS-232/485 Mode selectable by jumper
RS-232 Mode: Asynchronous full duplex, point to point
Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-485 Mode: Half duplex, multi-drop
Signal: DATA+, DATA-