Filter
Top Products
ADAM-5560 Series User Manual 18
2.3.2 Selecting Power Supply Module
ADAM-5560 Series Controller works under unregulated power source between +10
and +30 VDC. When you arrange different I/O modules on ADAM-5560 Series Con-
troller’s backplane, it may require comparable power supply. Use the following steps
as guidelines for selecting a power supply for your ADAM-5000 Series control sys-
tem.
Refer to Table 2.2 to check the power consumption of ADAM-5000 Series Controller
and each I/O module.
Module ADAM-5030
SD Card Slot 2
USB 2.0 Slot 2
Table 2.2: Power Consumption of ADAM-5000 series (Main Units)
Main Units Description
Power
Consumption
ADAM-5000/485
Distributed Data Acquisition and Control System
based on RS-485
1.0 W
ADAM-5000
Distributed Data Acquisition and Control System
based on RS-485
4.0 W
ADAM-5000/TCP
Distributed Data Acquisition and Control System
based on Ethernet
5.0 W
ADAM-5510
PC-Based Programmable Controller (With Battery
Backup)
1.0 W
ADAM-5510M
Enhanced PC-Based Programmable Controller (With
Battery Backup)
1.2 W
ADAM-5511 PC-Based Programmable Controller with Modbus 1.0 W
ADAM-5510E 8-slot PC-Based Programmable Controller 1.2 W
ADAM-5510/TCP
Ethernet-enabled PC-Based Programmable
Controller
2.0 W
ADAM-5510E/TCP
8-slot Ethernet-enabled PC-Based Programmable
Controller
2.0 W
ADAM-5510KW PC-based SoftLogic Controller 1.2 W
ADAM-5510EKW 8-slot PC-based SoftLogic Controller 1.2 W
ADAM-5510EKW/TP 8-slot Ethernet-enabled SoftLogic Controller 2.0 W
ADAM-5560 8-slot Programmable Automation Controller 17 W