Filter
Top Products
ADAM-5560 Series User Manual 180
B.3.2 System Shielding
Figure B.11 System Shielding
Never stripping too much of the plastic cable cover. This is improper and can
destroy the characteristics of the Shielded-Twisted-Pair cable. Besides, the bare
wire shield easily conducts the noise.
Cascade these shields together by soldering. Please refer to follow- ing page for
further detailed explanation.
Connect the shield to Frame Ground of DC power supply to force the con-
ducted noise to flow to the frame ground of the DC power supply. (The ‘frame
ground’ of the DC power supply should be connected to the system ground)
Figure B.12 Cable Characteristics
The characteristic of the cable Don’t strip off too much insulation for soldering. This
could change the effectiveness of the Shielded-Twisted-Pair cable and open a path
to introduce unwanted noise.