Filter
Top Products
11 ADAM-5560 Series User Manual
Chapter 1 Overview
There are two LEDs besides each Ethernet port. The LEDs indicate operating status,
as explained below:
TX (Green): This LED blinks whenever the ADAM-5560 Series Controller
transmitting data to Ethernet.
Link (Orange): This LED is on whenever the ADAM-5560 Series Controller
connecting to Ethernet.
1.6 Limitations
1.6.1 Remote I/O Quantity
ADAM-5560 Series Controller can connect to ADAM-4000 Modbus I/O modules
through COM1/COM2/COM3/COM4 RS-485 port by Modbus protocol. (COM2 is also
workable if a RS-232 to RS-485 converter is used.) The typical quantity of remote I/O
connection is 128.
1.6.2 Modbus/RTU Slave Function
ADAM-5560 Series Controller support Modbus/RTU slave function.
1.6.3 TCP/IP Connections
Multiprog via Ethernet connection: maximum 4 connections
Modbus/TCP Server connection: maximum 64 connections
Modbus/TCP Client connection: maximum 128 connections
1.6.4 Firmware Upgrade Notice
When you would like to upgrade the firmware of ADAM-5560 Series Controller,
please do contact with Advantech Technical Support Team for support. Wrong proce-
dures will possibly cause potential problem to your system.
1.6.5 Boot-up Time
The boot-up time of ADAM-5560 Series Controller is around 40 seconds.