Filter
Top Products
ADAM-5560 Series User Manual 20
Select a suitable power supply from Table 2.4 or other comparable power resource
for system operation.
2.3.3 Install Main Unit and Modules
While inserting modules into the system, align the PC board of the module with the
grooves on the top and bottom of the system. Push the module straight into the sys-
tem until it is firmly seated in the backplane connector. Once the module is inserted
into the system, push in the retaining clips (located at the top and bottom of the mod-
ule) to firmly secure the module to the system.
2.3.4 I/O Slots and I/O Channel Numbering
The ADAM-5560 Series provides 7 slots for I/O modules. The I/O slots are numbered
0 through 6, and the channel numbering of any I/O module in any slot starts from 0.
For example, the ADAM-5017 is an 8-channel analog input module. Its input channel
numbering is 0 through 7.
Table 2.4: Power Supply Specification Table
Specification PWR-242 PWR-243 PWR-244
Input
Input Voltage 90 ~ 264 V
AC
85 ~ 132 VAC
170 ~ 264 VAC
100 ~ 240 VAC
Input Frequency 47 ~ 63 Hz 47 ~ 63 Hz 47 ~ 63 Hz
Input Current 1.2 A max. 1.4 A max
25 A/110 V
AC
50 A/220 VAC
(Inrush current)
Short Protection Yes Yes Yes
Output
Output Voltage +24 V
DC +24 VDC +24 VDC
Output Current 2.1 A 3 A 4.2 A
Overload Protection Yes Yes Yes
General
Dimension
181mm x 113 mm x
60 mm
(L x W x H)
181mm x 113 mm x
60 mm
(L x W x H)
181mm x 113 mm x
60 mm
(L x W x H)
Operating Temperature 0 ~ 50C (32 ~ 122F) 0 ~ 50C (32 ~ 122F) 0 ~ 50C (32 ~ 122F)
DIN-rail Mountable Yes No No