Filter
Top Products
ADAM-5560 Series User Manual 10
1.3.11 Mechanical
Case: ABS+PC with captive mounting hardware
Plug-in screw terminal block:
Accepts 0.5 mm
2
to 2.5 mm
2
, 1 - #12 or 2 - #14 to #22 AWG
1.3.12 Environment
Operating temperature: 0 ~ 55° C (32 ~ 122° F)
Storage temperature: -25° to 85° C (-13° to 185° F)
Humidity: 5 to 95 %, non-condensing
Atmosphere: No corrosive gases
1.3.13 Software Specifications
Real Time O.S: KW ProConOS (Up to 16 cycle tasks)
Programmable Code/Data Size: up to 710 KB
1.4 Dimensions
The following diagrams show the dimensions of the system unit and an I/O unit. All
dimensions are in millimeters.
Figure 1.3 ADAM-5560 Dimensions
1.5 LED Status
There are two LEDs on the front panel of ADAM-5560 Series Controller. The LEDs
indicate operating status, as explained below:
PWR: Power indicator. This LED is on whenever the ADAM-5560 Series Controller is
powered on.
RUN: Blinking while project is running, off while project is stopped.
Note! Equipment will operate below 30% humidity. However, static electricity
problems occur much more frequently at lower humidity levels. Make
sure you take adequate precautions when you touch the equipment.
Consider using ground straps, anti-static floor coverings, etc. if you use
the equipment in low humidity environments.