Filter
Top Products
32-EN
01GB05IVA-W502E.fm
ALPINE IVA-W502E 68-12118Z56-A (EN)
Setting item: DivX INFO.
If [ ] of DivX INFO. is touched, a DivX
®
file registered
code is displayed.
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: OFF / ON
Display Setup Operation
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [DISPLAY SETUP].
The DISPLAY SETUP screen appears.
3
Touch [], [] or [] etc., of the desired item to
change its setting.
Setting items:
TILT*
1
/ DIMMER / DIMMER LOW LEVEL / BACKGROUND /
AUTO BACKGROUND / DATA DOWNLOAD*
2
/
BASE COLOR / SCREEN ALIGNMENT
*
1
For operation, refer to “Adjusting the Monitor Viewing Angle” on
page 11.
*
2
Refer to “Downloading the BACKGROUND data” on page 39.
4
Touch [] to return to the previous screen.
Touch and hold [] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Displaying DivX
®
Disc Information
Setting the Video CD Play Mode
OFF: The PBC menu is not displayed.
ON: The PBC menu is displayed.
DISPLAY Setup
The Parking Brake must be engaged to access the DISPLAY
mode screen. Attempting to access this screen while driving will
display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
01GB00IVA-W502E.book Page 32 Wednesday, February 20, 2008 4:12 PM