Filter
Top Products
37-EN
01GB05IVA-W502E.fm
ALPINE IVA-W502E 68-12118Z56-A (EN)
Setting item: BLUETOOTH IN
Setting contents: ADAPTER / OFF
• The setting cannot be made when “Setting the External Device
Interrupt Mode” (page 35) is set to ON.
• For details on Bluetooth operation, refer to the Owner’s Manual of
the Bluetooth Box.
• If the Bluetooth Box compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
• If ON is set even when a CD changer is connected, the source name
on the SOURCE selection screen will change from CD CHG to USB.
Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
The unit’s (OPTION) button function can be changed.
Setting item: OPTION KEY
Setting contents: V. SEL / TEL
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
Setting item: AUX+ IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX+ cannot be
changed from this unit.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
Setting the Bluetooth Connection
(BLUETOOTH IN)
ADAPTER
:Select when the optional Bluetooth box is connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
OFF: Select to ignore any external interrupts.
Setting the USB Adapter to ON/OFF
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
Setting the VISUAL Soft Button
VISUAL: Recalls the VISUAL selection screen by touching
[VISUAL].
NAV.: Switches directly to the navigation screen by touching
[VISUAL].
Setting the OPTION Button on the Unit
V. SEL: Press (OPTION) to recall the V. SEL screen.
TEL: If you press (OPTION) when the Bluetooth Box is
connected, the Bluetooth TEL screen will be recalled.
Setting the Digital Output
Setting the AUX+ Mode
OFF: AUX+ source is not displayed
ON: AUX+ source is displayed
Adjusting the AUX+ Audio Level
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
01GB00IVA-W502E.book Page 37 Wednesday, February 20, 2008 4:12 PM