Filter
Top Products
38-EN
01GB06IVA-W502E.fm
ALPINE IVA-W502E 68-12118Z56-A (EN)
L.L.C. Setting Operation
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [L.L.C. SETUP].
The L.L.C. SETUP screen appears.
3
Touch [] or [] etc., of the desired item to change
its setting.
Setting items:
L.L.C.* VISUAL EQ* BRIGHT
COLOR* TINT*
CONTRAST SHARP* USER MEMORY*
* The setting is available in the visual source mode (except navigation
screen).
4
Touch [] to return to the previous screen.
Touch and hold [] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc through the screen displayed.
This function allows picture darkness (brighter black/deeper black) of a
dark scene to be adjusted.
Setting item: L.L.C.
Setting contents: OFF / 1 / 2 / 3 / 4 / 5
You can adjust the level of picture adjustment effectiveness
between 1 and 5.
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as AUTO is set in “Setting the Brightness of the Backlighting”
(page 33).
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the colour between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Colour adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Setting item: TINT
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each colour.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When setting PAL, you cannot adjust the TINT.
L.L.C. (Linear Luminance
Control) SETUP
The Parking Brake must be engaged to access the L.L.C. mode
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of L.L.C. Setup. Refer to each section for details.
Picture Quality Darkness Adjustment
Function (L.L.C.)
1 2 3 4 5
Darker Brightness Darkness Balance
Brighter
Selecting the VISUAL EQ Mode (Maker’s
setting)
OFF (FLAT): Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1: Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 39).
P-2: Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 39).
Adjusting Brightness
Adjusting Colour of Picture
Adjusting Tint of Picture
01GB00IVA-W502E.book Page 38 Wednesday, February 20, 2008 4:12 PM