Alpine IVA-W502E DVD Player User Manual


 
36-EN
01GB05IVA-W502E.fm
ALPINE IVA-W502E 68-12118Z56-A (EN)
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / NTSC / PAL
By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
To apply the setting, set to VISUAL in “Setting the VISUAL Soft
Button” (page 37).
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVA-W502E, the
voice guidance of the navigation system will be mixed with the radio or
CD play.
Setting item: NAV. MIX
Setting contents: OFF / ON
See “Adjusting NAV. MIX Level” under “Adjusting the Audio” on
page 25 to set the navigation interruption volume level.
The volume level for voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
This setting is effective when NAV. IN of SYSTEM list screen is ON.
Setting item: AUX IN
Setting contents: OFF / ON / DVD / GAME / TV / DVB-T /
EXT. DVD / NAV.
OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM setup, although the AUX name can be
changed, it is not displayed on the source selection screen.
When OFF is selected, the settings related to AUX cannot be changed
from this unit.
The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting contents: LOW / HIGH
After setting to ON in “Setting the AUX mode”, this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting contents: NTSC / PAL
The video input type can be changed.
Outputs the picture of the source selected on the IVA-W502E connected
to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
Setting the Rear Camera Input
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
NTSC/PAL: Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA
source.
Setting the Navigation Mode
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON: Navigation source is displayed.
Setting the Navigation Interruption
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
Switching the Visual Input Signal System
Setting the Picture Output
OFF: The “RSE” item is not displayed on the SOURCE
selection screen.
ON: The “RSE” item is displayed on the SOURCE selection
screen.
Touch [RSE] to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
01GB00IVA-W502E.book Page 36 Wednesday, February 20, 2008 4:12 PM