Filter
Top Products
33
5. MENU SETUP
There are 9 functional items for operation setting in the setup menu system as shown below. The following
sections will instruct you step by step to configure the operation setting and will state each item’s purpose
and options. To enter any particular item, press the corresponding channel number from CH 1~9 on the
front panel. You can also use the “
^” (up) and “v” (down) buttons, or rotate the jog dial, to select any of the
items. Once inside the item’s system, the on-screen menu allows you to set up the key features of the unit.
The functions of the various buttons within the menu-setup mode are described in the paragraphs below.
KEY FUNCTIONS
menu button
:
Press to enter the MAIN MENU page. You can also use this button to return directly to the
MAIN MENU page from any other page. After returning to the MAIN MENU page, you can
push the menu button again and then enter to exit the menu system page.
“
^” and “v” buttons :
Press to select a desired item.
“<”
and “>” buttons :
Press to move within a desired option or value.
Enter button
:
Press to enter a selected item.
Shuttle Ring :
Turn to change the value of any desired option.
Jog Dial :
Turn to move the focus in any direction you want.
CH 1~16
:
Press a channel number to enter a functional item of the same number on any page.
MAIN MENU
1 QUICK SETTING: ENTER
2 DISPLAY OPTION: ENTER
3 SEQUENCE SETTING: ENTER
4 PICTURE ADJUST: ENTER
5 OPERATION LOG: ENTER
6 ADVANCED SETTING: ENTER
7 DEFAULT SETTING: ENTER
8 PASSWORD SETTING: ENTER
9 EXIT MENU: ENTER
enter: select
▲/▼/jog/ch1~9: item