Filter
Top Products
54
6.2 Connection Testing
With the previous settings, follow the instructions below to ensure whether you have established the
connection successfully.
1. Click Start Command Programs
2. Type in ping 192.168.1.1 then Enter. (See the sample screen below)
** This IP is the DVR IP address that is assigned for the connected DVR.
3.If you receive a response as in the sample screen below, the connection hasn’t been successfully
established. Please re-check all the hardware and software installation by repeating steps 1 to 5. If you still
can’t establish the connection after rechecking, please contact your dealer.