Filter
Top Products
44
5.6.6 COMMUNICATION
We provide you with two settings: the RS 232 and RS 485.
1. RS-232 SETTING:
You have the option of using an ID code ( any number between 0 and 9999 ) or a Baud rate ( at
5 different levels : 1200, 2400, 4800, 9600, and 19200 ).
2. RS-485 SETTING: The options are:
1. ID CODE: Use any number between 0 and 9999.
2. BAUD RATE: At the rates of 1200, 2400, 4800, 9600, and 19200.
3. MASTER CLOCK: Activate ON or OFF
4. RETURN: Go back to the previous page.
3. NET SETTING:
This option is used to configure the Ethernet communication settings. This is required for the
purpose of making a network connection. Please consult with a qualified MIS professional to
configure it.
NOTE:
If provided with a DHCP server, the 16CH DVR can get an IP automatically by setting
the DHCP item to ON.
4. RETURN: Go back to the previous page.
ADVANCED SETTING
1 ALARM SETTING: ENTER
2 RECORD SETTING: ENTER
3 MOTION SETTING: ENTER
4 CAMERA COVERT: ENTER
5 OPERATION LOCK: ENTER
6 COMMUNICATION: ENTER
7 DISK SETUP: ENTER
8 SCHEDULE: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~8: item
COMMUNICATION
1 RS-232 SETTING : ENTER
2 RS-485 SETTING : ENTER
3 NET SETTING: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~3: item
COMMUNICATION
1 RS-232 SETTING : ENTER
2 RS-485 SETTING : ENTER
3 NET SETTING: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~3: item
NET SETTING
1 DHCP : OFF
2 IP ADDRESS : 192.168.001.001
3 SUBNET MASK: 255.255.255.000
4 GATEWAY: 192.168.001.254
5 HTTP PORT: 00080
6 ADMIN NAME: ADMIN
7 ADMIN PASSWORD: 9999
8 VIEWER NAME: VIEWER
9 VIEWER PASSWORD: 9999
10 DEVICE NAME: DVR
RETURN
menu: exit
shuttle: value
◄/►/ jog: move
▲/▼/ ch1~10: item