Filter
Top Products
40
5.6 AVANCED SETTING
This page includes multiple special functions.
5.6.1 ALARM SETTING
This page enables you to set all the various alarm - related functions. The device will record as long as
the alarm is activating.
1. ALARM DURATION:
Set the desired time period. The options range from "TRANSPARENT" to "NONSTOP", from one
second to 60 minutes.
NOTE: You can't set a time frame of so many seconds and minutes at the same time.
2. DISK - FULL ALERT:
This signals a disk is fully recorded. The options are "ON' and "OFF".
ON: Enables the function.
OFF: Disables the function.
3. PREALARM:
This option determines that images prior to an alarm will be recorded in the hard- disk drive. When
an alarm is triggered the device will record the images prior to the alarm for 10 seconds.
ON: Enables the function.
OFF: Disables the function.
MAIN MENU
1 QUICK SETTING: ENTER
2 DISPLAY OPTION: ENTER
3 SEQUENCE SETTING: ENTER
4 PICTURE ADJUST: ENTER
5 OPERATION LOG: ENTER
6 ADVANCED SETTING: ENTER
7 DEFAULT SETTING: ENTER
8 PASSWORD SETTING: ENTER
9 EXIT MENU: ENTER
enter: select
▲/▼/jog/ch1~9: item
A
DVANCED SETTING
1 ALARM SETTING: ENTER
2 RECORD SETTING: ENTER
3 MOTION SETTING: ENTER
4 CAMERA COVERT: ENTER
5 OPERATION LOCK: ENTER
6 COMMUNICATION: ENTER
7 DISK SETUP: ENTER
8 SCHEDULE: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~8: item
ADVANCED SETTING
1 ALARM SETTING: ENTER
2 RECORD SETTING: ENTER
3 MOTION SETTING: ENTER
4 CAMERA COVERT: ENTER
5 OPERATION LOCK: ENTER
6 COMMUNICATION: ENTER
7 DISK SETUP: ENTER
8 SCHEDULE: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~8: item
A
LARM SETTING
1 ALARM DURATION: 30 SEC
2 DISK FULL ALERT: ON
3 PREALARM: OFF
4 ALARM RECORD RATE: 60 F/S
5 ALARM RECORD MODE: ENTER
6 ALARM RECORD QUALITY: ENTER
7 SENSOR TYPE: ENTER
8 ALARM INPUT LINK: ENTER
9 ALARM OUT LINK: ENTER
RETURN
menu: exit
enter: select
shuttle: value
▲/▼/jog/ch1~9: item