Filter
Top Products
41
4. ALARM RECORD RATE:
For an NTSC unit we provide many different speeds from 0 to 60 fields per second, and for a PAL
unit the figures are from 0 to 50 F/S.
5. ALARM RECORD MODE:
Each channel is provided with four categories of alarm record rates: NORMAL, DOUBLE,
INTERLEAVED, and EXCLUSIVE.
6. ALARM RECORD QUALITY:
Similarly enter and set each channel to record an alarm at qualities ranging from BEST, HIGH, and
STANDARD to BASIC.
7. SENSOR TYPE:
Again, the alarm input in each channel can be set to a "SENSITIVITY" of from 0.1 to 0.8 seconds.
8. ALARM INPUT LINK:
Enter and set each channel to activate ( ON ) or deactivate ( OFF ) the three modes of "SENSOR",
"V ( VIDEO )-LOSS", and "ACTIVE".
9. ALARM OUT LINK:
Enter and activate ( YES ) or deactivate ( NO ) the three alarm output modes of "SENSOR",
"V-LOSS" and "ACTIVE" for the following : ALARM OUT 1, 2, and 3, BUZZER, MAIN and CALL
DISPLAYs, START RECORDING, and CALL FULL SCREEN.
10. RETURN
Go back to the previous page.
5.6.2 RECORD SETTING
This page enables you to set the recording rate and recording quality, and enables you to continue
recording if you set the "RECORD MODE" to "NONSTOP".
ADVANCED SETTING
1 ALARM SETTING: ENTER
2 RECORD SETTING: ENTER
3 MOTION SETTING: ENTER
4 CAMERA COVERT: ENTER
5 OPERATION LOCK: ENTER
6 COMMUNICATION: ENTER
7 DISK SETUP: ENTER
8 SCHEDULE: ENTER
RETURN
menu: exit
enter: select
▲/▼/jog/ch1~8: item
RECORD SETTING
1 RECORD QUALITY: ENTER
2 NORMAL RECORD RATE: 30 F/S
3 ALARM SAMPLING RATE: 44K Hz
4 AUDIO CHANNEL MODE: STEREO
RETURN
menu: exit
enter: select
shuttle: value
▲/▼/jog/ch1~4: item