Filter
Top Products
DVr stAtioN
8
USER MANUAL - version 1
CONFIGURING THE “TV OUT” PARAMETERS
The wizard will help you congure the following settings. If you ever need to change these settings again, you can
always select “Tools” > “Settings” > “TV out”.
“TV Connection”
select the type of video output (“
Composite”, “”, “Component”, “RGB” or “HDMI”), based on how
you have connected the DVR Station to your TV.
If you use the supplied cables, select “RGB” (for Europe) or “S-Video” (for US). If you use other cables, then select the correspond-
ing video output type.
“Resolution” *
select the resolution that best adapts to your TV: “
VGA 4/3 (640x480)”, “480p 16/9 (720x480)” “576p 16/9
(720x576)”, or “720p 16/9 (1280x720)”
* This parameter only appears if you choose the “HDMI” TV connection mode.
“TV Standard” **
choose between the “
NTSC (USA)” and “PAL (Europe)” systems (select the one that is compatible with
your country’s television system).
“TV Format” **
“4:3” or “16:9” - the format used by your television set to display images.
the option “
Wide screen” becomes available when you set the “TV standard” parameter to “PAL (Europe)”.
** These parameters do not appear if you choose the “HDMI” TV connection mode.
“Audio Output”
denes whether the audio signal is sent out via the “”, “HDMI” or “SPDIF” interface depend-
ing on how you have connected the DVR Station to your TV.
See chapter 3 (
TV Recording: Hardware Setup)
to learn how to connect a tuner to the DVR Station in order to schedule
a TV recording (manually or via the TV Program Guide).
2.3. using The arChOs inTerfaCe
Here are a few tips to use your ARCHOS while it is connected to the DVR Station.
SWITCHING THE DISPLAY BETWEEN THE ARCHOS SCREEN AND THE TV
To switch the display of the ARCHOS between the built-in LCD screen and the TV, you can either press the TV but-
ton on the remote control or use the “DVR Station”>“Switch to TV out” icon on the ARCHOS Home Screen.
-
-
-
-
-
-