Filter
Top Products
Using System Designer
4-2 FPSLIC STK594 User Guide
2819A–FPSLI–07/02
Figure 4-1.
Tutorial Design Block Diagram
4.3 Design Flow The design presented in this tutorial, only performs the required steps for designing and
programming an AT94K series device. For more information on the optional steps (i.e.
Simulation and Co-verification) please consult the FPSLIC application notes available
on the Atmel web site. Figure 4-2 outlines the design flow followed in this tutorial. For
more information on a specific step, consult the appropriate section within this tutorial.
Figure 4-2.
Design Flow
4.4 Creating a
Project
This tutorial uses the
New Project Wizard
to assist with the creation of the project. The
New Project Wizard allows you to choose your Project Directory, Target Device, and
desired Tool Flow.
1. Launch System Designer from the desktop icon, or by pointing to
Start > Pro-
grams > Atmel > SystemDesigner
.
2. Create a new project by selecting
New
from the
Project
menu and then pressing
the
New Project Wizard
button. The
New Project Wizard
window opens, see Fig-
ure 4-3.
IOSELA0
IOSEL A0
INTA0
GCLK5
AVR
Microcontroller
FPGA Interrupt 0
Global Clock 5
LOAD
ENABLE
D[7:0]
RESET
Q
RCO
CLOCK
AVR Data Bus 8-bit
FPGA
8-bit Counter
FIOWEA
aWE
AVR Write Enable
FPGA I/O SELECT 0
PORTD
Microcontroller
Assembly
HDL Synthesis
AVR <> FPGA
Interface
FPGA
Place & Route
Bitstream
Generation