Filter
Top Products
Using System Designer
FPSLIC STK594 User Guide 4-11
2819A–FPSLI–07/02
4.9 Bitstream
Generation
The Bitstream Generator takes the outputs from both the FPGA and AVR compilers,
and generates a single programming file for use in configuring the AT94K device.
1. Press Bitstream Generation to open the bitstream utility. The FPSLIC Control
Register Settings dialog opens, see Figure 4-16.
Figure 4-16.
FPSLIC Control Register Settings Dialog
2. Check the
Include FPGA Bitstream
box and select COUNTER.BST by pressing
Browse.
3. Check the
Include AVR Hex File
box and select STK594.HEX by pressing
Browse
.
4. Select the Control Register Settings tab and use the default settings, see Figure
4-17.