Filter
Top Products
On Screen Display (continued)
8.3.6 V POSITION
Activates slider to adjust vertical position.
For PiP channel signal source, move “ ” down and press “Select” key then change of PiP input using the “<” and “>”
keys.
8.4 INPUT SETUP
The Input Setup menu contains the sub-menu for input signal selection and input format selection. Both MAIN and PiP
channel can map to any one of the following video input. However, there are restrictions based on the board
configuration. The chart below shows the valid input combinations.
8.4.1 MAIN INPUT
For MAIN channel signal source, pressing the “Select” key permits the change of input using the “<” and “>’ keys. The
color of the selection is RED when it is changed. Press “Select” key to confirm the current selection.
8.4.2 PiP INPUT
h
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMATAUTO
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST
INPUT SETUP
MAIN INPUT TV
PiP INPUT RGB
MAIN FORMAT AUTO
PiP FORMATAUTO
ADC CLOCK 1350
ADC PHASE 10
AUTO ADJUST
MAIN
PiP
TV
TV
VIDEO
VIDEO
SVIDEO
SVIDEO
RGB
RGB
RGB
RGB
YPbPr
RGB
YPbPr
RGB
YPbPr
TV
SVIDEO
VIDEO
YPbPr
YPbPr
YPbPr
TV
VIDEO
SVIDEO
Valid Input Combinations
-8-