Filter
Top Products
-18-
10.1 (Continued)RS-232 Protocol
!KEY_UP<CR> Up arrow key
!KEY_DOWN<CR> Down arrow key
!KEY_OSD<CR> On Screen display on/off button
!KEY_LAST<CR> Toggles between the last 2 channels selected
!KEY_INFO<CR> Shows information on the screen
!KEY_MTV<CR> TV to Main
!KEY_MVID<CR> Video to Main
!KEY_MSVID<CR> SVideo to Main
!KEY_MRGB<CR> RGB to Main
!KEY_MYPBPR<CR> YPbPr to Main
!KEY_PTV<CR> TV to PiP
!KEY_PVID<CR> Video to PiP
!KEY_PSVID<CR> Svideo to PiP
!KEY_PRGB<CR> RGB to PiP
!KEY_PYPBPR<CR> YPbPr to PiP
!FLBOX<CR> Format Letter Box
!FPBOX<CR> Format Pillar Box
!FPAN<CR> Format Panoramic
!FAUTO<CR> Format Auto
!AUDMAIN<CR> Audio Follows Main
!AUDPiP<CR> Audio Follows PiP
?AUDIN<CR> Query what the audio follows. Responds with ~AUDMAIN<CR> or ~AUDPiP<CR>
!PWRON<CR> Power On
!PWROFF<CR> Power Off
?PWR<CR> Query Power status responds with ~PWRON<CR> or ~PWROFF<CR>
!VOLxx<CR> Volume Level Set xx=00 to 64 Responds with ~VOL52<cr> for volume level 52.
00 is Mute for this command. 52 is zero dB
?VOL<CR> Query Volume Level Responds with ~VOL10<CR> for volume level 10.
?MCH<CR> Query Main Channel Responds with ~MCH002<CR> for channel 2.
!MCHxxx<CR> Main Channel change !MCH025<CR> for channel 25. xxx = 001 to 125
!MSVIDPRGB<CR> Main to SVideo, PiP to RGB
!MVIDPRGB<CR> Main to Video, PiP to RGB
!MTVPRGB<CR> Main to TV, PiP to RGB
!MSVIDPYPBPR<CR> Main to SVideo, PiP to YPbPr
!MVIDPYPBPR<CR> Main to Video, PiP to YPbPr
!MTVPYPBPR<CR> Main to TV, PiP to YPbPr
!MRGBPSVID<CR> Main to RGB, PiP to SVideo
!MRGBPVID<CR> Main to RGB, PiP to Video
!MRGBPTV<CR> Main to RGB, PiP to TV
!MYPBPRPSVID<CR> Main to YPbPr, PiP to SVideo
!MYPBPRPVID<CR> Main to YPbPr, PiP to Video
!MYPBPRPTV<CR> Main to YPbPr, PiP to TV
!PONE<CR> SIngle PiP
!POFF<CR> Full Screen
!PSBS<CR> Side by Side
!PPAP<CR> PAP
!PT0+16<CR> 16 Tile
!PT1+4<CR> 1 Main 4 Tile
!PT1+7<CR> 1 Main 7 Tile
!PT1+12<CR> 1 Main 12 Tile
!PBxx<CR> PiP Blending Level xx= 01 to 16 The higher the number the less transparent
!PSxx<CR> PiP Size for Single Mode xx= 01 to 15 The higher the number the bigger the PiP
!PHxxxVxxx<CR> PiP Position for Sinlge Mode xxx = 000 to 100 Hxxx is Horizontal Position Vxxx is
Vertical Position
!PxxCHxxx<CR> PiP Channel Change Pxx is PiP number=1to16 CHxxx is PiP channel = 001 to 125
?PxxCH<CR> PiP Channel Query xx=1to16Responds with ~PxxCHxxx<CR> Pxx is PiP number
CHxxx is PiP channel