Filter
Top Products
On Screen Display (continued)
8.6.3 SOURCE
There are three choices for TV sources: BCST (broadcast), CATV(cable), IRC and HRC. The default setting is CATV.
8.7 PiP SETUP
The PiP setup menu is used to subdivide the screen into a pre-defined set of windows. The actual formats are different
depending on aspect ration of the output display.
8.7.1 PiP MODE
The PiP mode selection is either OFF (default), ONE(single PiP), or TILE 1+4, TILE 1+12, TILE 0+16(multiple PiP), Side-by-Side
images. The values of the corresponding setup are not displayed when PiP mode is OFF.
The sub-menu items: aspect, ration, size, and position apply to single PiP mode only.
Sub-menu items: ASPECT RATIO, SIZE, and POSITION apply only to single PiP mode.
i
Sub menu item TILE mode apply only to multiple PiP modes.
TV SETUP
MAIN CH 004 ADD
PiP #01 CH 027
TV SOURCE CATV
PiP SETUP
PiP MODE -OFF
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP SETUP
PiP MODE -OFF
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP SETUP
PiP MODE - ONE
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
PiP
MAIN
PiP SETUP
PiP MODE - TILE
ASPECT RATIO
SIZE
H POS
V POS
PiP BLENDING
MAIN
-11-