Filter
Top Products
-20-
10.1 (Continued)RS-232 Protocol
General Info
a display causing damage.
The above is to show the display area (black) with the text Hello World in Green. The white outline is a
representation of where the 15 x 30 area may be position based on the delay commands. A white border does not
appear on the actual screen.
Unless otherwise noted all valid commands are echoed back if properly received.
When Main TV channel is changed via remote or contact closure, the RS232 is updated by sending a ~MCHxxx<CR>
response
When Volume is changed via remote or contact closure, the RS232 is updated by sending a ~VOLxx<CR> response
Invalid commands will reply with ~ERROR<CR>.
Hello World