Filter
Top Products
AVerMedia AVerKey500 Pro User’s Manual
12
Connecting a TV Monitor and Video Source
Use the connectors at the side panel of the AVerKey500 Pro to connect a TV
monitor (or any video monitor). If you have a video source such as a VCR,
laserdisc player or video camera originally connected to your TV monitor, you can
also connect the video source to the AVerKey500 Pro.
To output your computer presentation to a TV monitor :
¬ S-OUT : If you have a TV monitor that uses the S-video standard,
connect the supplied S-Video Cable to the AVerKey500
Pro "S-OUT" port and the TV monitor's "S-IN" port.
VIDEO-OUT : If you have a TV monitor that uses the Composite video
standard, connect the supplied AV Cable to the
AVerKey500 Pro "VIDEO-OUT" port and the TV
monitor's "VIDEO-IN" port.
Refer also to the setup diagram on the next page for the proper cable
connections.
To use the AVerKey500 Pro as a Video Switcher :
The AVerKey500 Pro allows you to connect a computer and a video device
such as the VCR or LaserDisc Player. You can then use the AVerKey500 Pro
as a Video Switcher to select either source to be the final output.
Environments such as classrooms and conference rooms usually require a TV
to be connected to a VCR at all times. Now with the AVerKey500 Pro, you do
not need to disconnect cables whenever you need to use the TV with either
the computer or the VCR/LaserDisc.
To connect the AVerKey500 Pro to a VCR or any video source :
® S-IN : If the VCR (or any video source) is originally attached to
your TV monitor and it uses the S-video standard, use an S-
Video Cable to connect the VCR to the AVerKey500 Pro
"S-IN" port and the TV monitor's "S-OUT" port.
¯ VIDEO-IN : If a VCR (or any video source) is originally attached to the
TV monitor and it uses the Composite video standard, use
an AV Cable to connect the VCR to the AVerKey500 Pro
"VIDEO-IN" port and the TV monitor's "VIDEO-OUT"
port.
Refer also to the setup diagram on the next page.