Filter
Top Products
Chapter 3 Using the AVerKey500 Pro
15
POWER : Switches the
AVerKey500 Pro on/off.
RESET : Restores the
AVerKey500 Pro to original
factory settings.
SHARPNESS : Press the
+ button to increase the
sharpness level.
Press the
-
button to decrease the
sharpness level.
BRIGHTNESS : Press the
+ button to increase the
brightness level.
Press the
-
button to decrease the
brightness level.
OVERSCAN : Toggles between Underscan and Overscan.
Overscan displays the computer image on
TV to the fullest. The image will be
chopped off at the borders when displayed
this way.
When you switch to Underscan, the
computer image will be completely
displayed on TV.
NOTE : Images will not be chopped off for resolutions up to
1600 x 1200 in underscan mode.
MOUSE/KEY : Toggles between the Remote Mouse and
AVerKey500 Pro modes.
L (Left Mouse Button) : Works the same as the left mouse button of a wired
mouse. To drag-and-drop, you must use this button
with the L.DRAW or R.DRAW button. Refer to
the section, The Remote Mouse, for more details.
R (Right Mouse Button) : Works the same as the right mouse button of a
wired mouse. To drag-and-drop, you must use this
button with the L.DRAW or R.DRAW button.
Refer to the section, The Remote Mouse, for more
details.