Filter
Top Products
AVerMedia AVerKey500 Pro User’s Manual
28
Panning to Other Parts of the Zoomed Image
1. Check and see if the PAN/POS LED on the AVerKey500 Pro front panel
is OFF. If it's not, press the PAN/POS button to switch to PAN mode.
2. Press on the Directional Buttons to view other parts of the zoomed
image.
Adjusting the Image Position
1. Check and see if the PAN/POS LED on the AVerKey500 Pro front panel
is ON. If it's not, press the PAN/POS button to switch to POS mode.
2. Press on the Directional Buttons to move the image up, down, left, or
right.
The LED Panel
At the front panel of the AVerKey500 Pro, you will find the Infrared Sensor and
several LEDs. Each LED shows you whether or not a particular function or
operating mode is active. The figure and descriptions below explain what each
LED represents.