44
Connect a Bang & Olufsen recorder
>> Connect additional video equipment
Disconnect all involved systems from the mains
before you connect external equipment.
> Connect one end of a 21-pin AV cable to the AV
socket on the rear of the recorder.
> Then run the cable to the AV 1 socket on the
back of the television.
Aerial connection
Use your external aerial connection (or cable TV
network connection) and the aerial cable supplied
with the video recorder.
> Connect the cable from your external aerial to
the signal input socket marked
on the rear
panel of the recorder.
> Direct the aerial signal to the television, using
the aerial cable supplied with the recorder.
> Plug one end into the socket marked ‘TV’ on
the recorder and the other end into the aerial
socket marked ‘TV’ on the television’s socket
panel.
BeoCord V 8000
If you connect a BeoCord V 8000 to your tele-
vision, some of the features of the BeoCord
V 8000 function differently than described in the
BeoCord V 8000 Guide, and some are not avail-
able. A supplement for the BeoCord V 8000 Guide
is available from you Bang & Olufsen retailer.
Video recorder BeoCenter