Filter
Top Products
49
Connect Bang & Olufsen speakers and a
BeoLab
2 subwoofer to the connection panel
at the back of the television. The speakers
must be Bang & Olufsen Power Link speakers.
To connect speakers…
> Use the cables enclosed with the speakers.
> Connect the two front speakers to the sockets
marked FRONT.
> Connect the two rear speakers to the sockets
marked REAR.
> Connect the subwoofer to the socket marked
SUBWOOFER.
You can loop the signals from speaker to speaker
(as described in the Guide enclosed with your
speakers), or you can connect each speaker to a
socket. Longer cables and adaptors are available
from your Bang & Olufsen retailer.
Remember to set the L–R–LINE switch on both the
front and rear set of speakers to L or R (left and
right channel) to indicate their position in each set.
Set the left speakers to L and the right speakers
to R.
> Press MENU to bring up the TV SETUP menu
and press
to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press
to highlight SOUND.
> Press GO to bring up the SOUND SETUP menu
and press
to highlight SPEAKER TYPE.
> Press GO to bring up the SPEAKER TYPE menu.
> Press
or to reveal your speaker type and to
move on to the next speaker set. Choose NONE
if no speakers are connected.
> If you have a BeoLab 2 subwoofer, press to
move the cursor to SUBWOOFER and press
to
change the field to YES.
> Press GO to store or EXIT to leave the menu
without storing.
Connect speakers
SPEAKER TYPE
store
GO
FRONT BEOLAB 1
REAR BEOLAB 6000
SUBWOOFER YES
L R
L R
FRONT
SUBWOOFER
REAR