Filter
Top Products
20
Option setting
Tosetthelinkroomtelevisiontothecorrect
Option…
>Whileholdingthe•button,pressLIST.
> Let go of both buttons.
> Press LIST repeatedly to display OPTION? on
Beo4 and press GO.
> Press LIST repeatedly to display V.OPT on Beo4
and press 6*.
Timer Play in link room
If your television is placed in the link room, it can
be part of a Timer Play programmed on your main
room system.
To make your television part of a Timer Play …
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
to highlight PLAY TIMER.
> Press GO to bring up the PLAY TIMER menu.
TIMER ON/OFF is already high lighted.
> Press
or to reveal ON.
> Press GO to store the setting.
*If you connect the television for use in a link room
where other link systems are already connected,
you must set the television to Option 5 instead.
If your television is equipped with the
optional System Module and you
choose to use your television in a link
room, you can operate all connected
systems through the television.
For your entire system to function
properly, it is essential that the link
room television is set to the correct
Option before you connect it to the
system in the main room.
You must follow the procedure
described below when you connect
your television for use in a link room:
1 Connect the link room television to
the mains.
2 Using the Beo4 remote control,
program the link room television
to Option 6*.
3 Disconnect the link room television
from the mains.
4 Make the link and aerial
connections.
5 Reconnect the link room television
to the mains.
BeoVision in a link room
PLAY TIMER
store
GO
TIMER ON
Option 6*
NOTE! If your BeoVision 8 is linked to a video
master with the possibility of programming a
Timer Play, the Timer Play can be executed on
BeoVision 8.
Main room Link room