Bang & Olufsen 8 CRT Television User Manual


  Open as PDF
of 60
 
33
Whileyouarewatchingamovieor
programme,youcanchoosethespeaker
combinationyouwishtoswitchon,provided
thatthevarioussoundmodesareavailablein
yoursystem.
Thetelevisionmayswitchonaspeaker
combinationautomatically.Thishappensifa
programmeorDVDcontainsinformation
aboutthenumberofspeakerstobeswitched
on.Youarestillfreetochoosethespeaker
combinationyouprefer.
To choose a speaker combination …
> Press LISTon Beo4 until SPEAKER is shown in
the Beo4 display.
> Press the number of the speaker combination
you want. The selected speakers cut in
automatically.
> If you want to adjust the sound balance for the
programme you are watching, press
or to
adjust the balance between the external front
and rear speakers, and press
or to adjust
the balance between the left and right speakers.
> Press EXITto remove SPEAKER from the Beo4
display and to return to the source you were
using.
Speaker combinations
SPEAKER 1 … Sound in the centre speaker only.
SPEAKER 2 … Stereo sound in the front speakers.
Subwoofers are active.
SPEAKER 3 … The centre speaker, front speakers
and subwoofers are active.
SPEAKER 4 … The front speakers, surround
speakers, and subwoofers are active.
SPEAKER 5 … Surround sound from all speakers
and subwoofers.
If you only have connected a pair of front speakers
to the television, you can only choose SPEAKER 1–3.
Choose a speaker combination
 previous next