Bang & Olufsen 8 CRT Television User Manual


  Open as PDF
of 60
 
30
Loudspeaker setup – surround sound
Add four Power Link speakers and a
BeoLab subwoofer to your setup and
you have a surround sound system.
A surround sound setup fits easily
into your living room. Let the picture
determine your ideal listening and
viewing position. You get the best
sound experience in the area created
by the speakers.
Select speaker types
ConnecttheloudspeakerstothePowerLink
socketsonthetelevision.RefertotheGuide
enclosedwiththeloudspeakersforspecic
informationabouthowtosetthemup.Refer
to‘Connection panels’onpage51for
informationaboutthePowerLinksockets.
Remember to set the L–R–LINE switch on both the
front and rear set of speakers to L or R (left and
right sound channel) to indicate their position in
each set. Set the left speakers to L and the right
speakers to R.
To register the speaker types …
> Press MENUto bring up the TV SETUP menu
and press
to highlight SOUND.
> Press GO to bring up the SOUND menu and
press
to highlight SPEAKER TYPE.
> Press GO to bring up the SPEAKER TYPE menu.
> Press
or to reveal your speaker type and to
move on to the next speaker set. Choose NONE
if no speakers are connected.
> If you have a BeoLab subwoofer, press
to
move the cursor to SUBWOOFER and press
to
change the field to YES.
> Press GO to store or EXITto leave the menu
without storing.
Always select your most powerful speakers as
front speakers.
SPEAKER TYPE
store
GO
FRONT BEOLAB 8000
REAR BEOLAB 4
SUBWOOFER YES
 previous next